What did you do to your Mirage today?

[Nobu]

Swapped the white LEDs for Amber in the parking lights, and moved the white LEDs to the side markers since those have been dead for I dunno how long. Also swapped the blue LED in my temp gauge for an Amber LED. It's not nearly as bright as the blue, but almost matches the cluster now.

[Kildonon]

ALSO I found a metal elongated bucket that fits perfectly in the middle and essentially topped it off with a tiny dollartree toolbox and it makes a weirdly perfect arm rest. It is unfortunately a Canadian Flag bucket, but it was a pretty sweet $5 spent. It's really nice actually, having that extra storage space goes a long way to me keeping my car clean. I'll take a picture and post it in the center console thread tomorrow, lol.

I'd like to see if I could find something similar for the armrest!

[MetroMPG]

[Dookaughs]

NA Miata wheels?

[MetroMPG]

Good eye!

Off my crapcan Miata.

The bolt pattern is the same, but the stock center bore is too small for the Mirage - I enlarged it a couple of millimeters.

Only 3 more wheels to go...

[Mark]

Good eye!

Off my crapcan Miata.

The bolt pattern is the same, but the stock center bore is too small for the Mirage - I enlarged it a couple of millimeters.

Only 3 more wheels to go...

Are you putting your Mirage steel wheels on your Miata? Assume they would fit just fine as is.

[7milesout]

I enlarged it a couple of millimeters.

How did you go about enlarging the center bore?

[MetroMPG]

A carbide grinding dremel bit and 4 or 5 coarse mini sanding wheels. And entirely too much time.

It'd be a 10 minute job in a machine shop.

[MetroMPG]

Are you putting your Mirage steel wheels on your Miata? Assume they would fit just fine as is.

I have a spare set of 14" steelies with snows that will be placeholders on the Miata when its wheels are on the Mirage.

[Fummins]

A carbide grinding dremel bit and 4 or 5 coarse mini sanding wheels. And entirely too much time.

It'd be a 10 minute job in a machine shop.

I tried this with some steel kijiji wheels from an accent that I took the sellers work that the center bore was correct. I used the same method but gave up after half way through the second wheel. Using a tiny pancake air compressor didn't help things.

Hopefully aluminum goes faster, unless it plugs up your bit.