Results 1 to 10 of 61

Thread: Fumoto Oil Drain Valve Specs

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Alex1a1f's Avatar
    Join Date
    May 2016
    Location
    Portland, Oregon
    Country
    United States
    Posts
    1,541
    Thanks
    754
    Thanked 926 Times in 520 Posts

    Fumoto Oil Drain Valve Specs

    I have always changed my own oil on all my vehicles, and I have had a Fumoto Valve for every one of them.
    If you change your own oil, these valves are a life-saver if you're tired of having to remove the oil plug, and
    can help reduce how much of mess you make.

    I have had the same valve (F106S) and elbow (L-001) for well over 500,000 miles and can vouch for their
    reliability. I know I would never go without one. :-)

    If you're worried about the valve opening, you don't need to. The valve is spring loaded and needs to be lifted
    before it is turned. However, they do make some clips (listed below) to ease those worries.

    I thought I'd throw some information and pictures down for anyone interested for themselves.




    Above are the available valves available that will work for our Mirages. I have the F106S valve and L-001
    90 degree elbow. I bought a 3/8" hose locally instead of from them.

    Oil pan F106
    CVT Oil pan F103

    For a small one-time fee, you'll have years of reliable service.




    CVT oil pan on Mirage


    Above are pictures installed on my Mirage.

    If you have any questions please throw them my way.
    Last edited by Alex1a1f; 09-14-2018 at 07:09 PM.
    (blank signature)

  2. The Following 8 Users Say Thank You to Alex1a1f For This Useful Post:

    craigq (09-14-2018),CROSSBOLT (10-17-2023),Daox (10-05-2017),flotownj (04-06-2017),inuvik (04-05-2017),MirageRally (02-19-2021),Top_Fuel (04-05-2017),Wayne (07-23-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •