Results 1 to 9 of 9

Thread: Dash Wrap and the Panel Above the Glove Box

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Nov 2017
    Location
    Seminole Florida 33777
    Country
    United States
    Posts
    13
    Thanks
    0
    Thanked 23 Times in 9 Posts

    Dash Wrap and the Panel Above the Glove Box

    I ordered in some purple-bronze carbon fiber vinyl from DHGate.com here: https://www.dhgate.com/product/1-52x...250623013.html

    I had to order a crap-load of it. 30 meters. I'll probably sell what I don't use on ebay when I'm done. It's color-shifting, so it looks almost orange (matches the Mitsubishi Sunrise Orange at a certain angle, and looks quite purple on other angles).

    I wrapped the 3 panels of the dash so far and the panel above the glove box. That panel is held in with 8 screws. Sorry, no photos of the panel out.

    If you remove the glove box, you may be able to see most of the screws. 2 on each end, 3 above, and 1 more on the bottom by the USB cord. Then the panel finagles out with a bit of wiggling and prying.

    I plan on wrapping door parts, the center console, other things inside, things outside. Kind of bling it out a bit. So I don't know how much of this wrap I need, or when I'll be done with it.
    Attached Images Attached Images    

  2. The Following 7 Users Say Thank You to sunshinelock For This Useful Post:

    01-7700 (12-24-2017),Alex1a1f (12-24-2017),Daox (12-24-2017),Eggman (12-24-2017),gone.a (12-24-2017),Marklovski (12-24-2017),Top_Fuel (12-24-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •