Woohoo, awesome. Glad to hear you got it working.
Woohoo, awesome. Glad to hear you got it working.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Looks like the ETACS Decoder software required to program the Cars' computer seems to be unavailable?
https://etacsdecoder.com/forum/showt...d=8561#pid8561
When I click on the link to "Etacs_Decoder_5145.rar" says the attachment doesn't exist.
Anyone have a copy of the software I could use?
Last edited by javensbukan; 10-04-2018 at 10:43 PM.
Oh perfect. Thanks!
Got the Doax cruise kit installed in my 2014 Mirage!
Ran into a few oddities that I wasn't expecting.
The Brake switch that I purchased in anticipation of needing to replace the one in my car wasn't needed, as it had a white brake switch with the extra two pins needed for the cruise control (oddly).
Also, the centre cable connector that you plug the cruise control panel wire into also carried the horn on my car, which is required for bi-annual safety inspections here, so I ended up splicing the cable into the two wires, and then plugged the cable back into its original spot so I can have a horn! I knew this was a possibility reading the forum, but I was hoping my 2014 somehow didn't have this setup.
The ETACS decoder software (Version 5330 and up anyway) now doesn't allow you to do *any* writes to the onboard car computer without paying a bit... for 5 "write credits" it cost me about $10 CAD... totally worth it.
The little cruise light doesn't show up on the dash, but it works, and works well! The car idles and cruises at very low RPMs, this will get a good workout when I go to Cape Breton next weekend!
White switch on left is what was in my 2014 DE CVT, the Blue one on the right I purchased for the project.
Last edited by javensbukan; 10-06-2018 at 08:29 PM.
Daox (10-06-2018)
That is odd that your dash light doesn't work. Did you change both settings in ETACs?
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Yeah,
I made sure to select both settings in ETACS for Cruise Control, and Cruise Control Options (Present, accept).
I'll have another look and double check, but yeah I'm pretty sure the little green cruise light didn't light up, but it works anyway!
Sorry, will it works on 2013 CVT Mirage?
Yes, I believe it would.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
__________________________________________
View my fuel log 2013 Space Star Cleartec Intense 1.0 manual: 55.7 mpg (US) ... 23.7 km/L ... 4.2 L/100 km ... 66.9 mpg (Imp)