Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: DIY! Clutch cable remove & replace

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    838
    Thanks
    495
    Thanked 298 Times in 184 Posts

    DIY! Clutch cable remove & replace

    Name:  P_20180128_083208.jpg
Views: 337
Size:  99.0 KB
    So, the problem was when i was driving i heard something snapped... then my clutch would'nt work anymore but luckily i was already near our place and had to push my mirage until i reached our front gate

    My mirage ODO reading is only around 36k --- premature! for 2yrs and 8mnths!
    So here's how!

    I will not include the tools as i assume that you can find what tools to be used ok!

    1. First, open your driver side door then move the seat back to get some space. Now, Kneel down until you see under your dashboard that it has a cover and you have to unscrew three plastic screw tabs then remove the cover underneath.

    Name:  P_20180128_095737.jpg
Views: 304
Size:  87.7 KB

    Name:  P_20180128_085046.jpg
Views: 306
Size:  97.0 KB
    Last edited by mitsumi; 01-28-2018 at 02:18 AM.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  2. The Following 2 Users Say Thank You to mitsumi For This Useful Post:

    Eggman (01-28-2018),MetroMPG (01-28-2018)

  3. #2
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    838
    Thanks
    495
    Thanked 298 Times in 184 Posts
    2. Open the hood, lift then take a picture
    Name:  P_20180128_081112.jpg
Views: 310
Size:  93.2 KB

    Basically, its hard to see the cable from this view if the throttle hose and battery is still there. So what you want to do is remove your battery and detached the throttle hose to have an easier access reaching the clutch cable etc.

    I assume you already know how to remove the battery. I always cover up the (-) side to prevent it from touching to any metal parts when i reconnect the (+) again.
    Name:  P_20180128_081722.jpg
Views: 310
Size:  92.3 KB

    Once, the battery is removed, next the throttle hose. Use a screwdriver to unscrew as seen on the pic. I chose to remove both ends to have a better clearance in removing the clutch cable.
    Name:  P_20180128_082226.jpg
Views: 316
Size:  95.2 KB
    Last edited by mitsumi; 01-28-2018 at 09:16 AM.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  4. The Following 2 Users Say Thank You to mitsumi For This Useful Post:

    Eggman (01-28-2018),MetroMPG (01-28-2018)

  5. #3
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    838
    Thanks
    495
    Thanked 298 Times in 184 Posts
    Now, this is not so hard but you have to have an advance sense of touch and feel hahaha...

    So, after removing the battery and the hose, go back underneath your dashboard driver side, because you have to reach out for this part (see pic below)! there's no pin on that part, you'll just have to push the latch up to remove it from being hooked.
    Name:  Clutch.jpg
Views: 305
Size:  66.3 KB

    Anyway, you may also skip this if you want and do it at the end before removing the cable so that the cable is loose.

    So now that you have clearance, you can now work on removing the cable. Just push a bit the cable so that when you try to remove that latch from the inside of the car it's much easier.
    Name:  P_20180128_082240.jpg
Views: 296
Size:  87.9 KB

    Just trace the cable and you'll see this, then un screw and pull up to remove.
    Name:  P_20180128_082726.jpg
Views: 295
Size:  85.5 KB

    Name:  P_20180128_082842.jpg
Views: 292
Size:  89.0 KB
    Last edited by mitsumi; 01-28-2018 at 08:58 AM.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  6. The Following 2 Users Say Thank You to mitsumi For This Useful Post:

    Eggman (01-28-2018),MetroMPG (01-28-2018)

  7. #4
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    838
    Thanks
    495
    Thanked 298 Times in 184 Posts
    To remove the end, there is a pin on it and you may just use a small cutter or pliers to remove it so that you can also remove the latch that was left there when the cable broke.
    Name:  P_20180128_082343.jpg
Views: 311
Size:  89.5 KB


    Then, once both ends are clear and removed, just pull out the cable carefully and your done removing it!
    Name:  P_20180128_082903.jpg
Views: 296
Size:  91.8 KB

    Name:  P_20180128_083347.jpg
Views: 295
Size:  86.7 KB

    Name:  P_20180128_083155.jpg
Views: 295
Size:  98.5 KB

    THAT'S ALL!

    -so when your cable is ready, i think you already know how to set it up.
    -better have an extra and keep it in your car for emergency purposes!

    the only problem now is I dont know how to adjust the cable the way it was setup before. I know where the adjustment knob is, but i dont know if when is enough and too much when adjusting the cable. Hope someone can help me
    Last edited by mitsumi; 01-28-2018 at 09:01 AM.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  8. The Following 5 Users Say Thank You to mitsumi For This Useful Post:

    Daox (01-29-2018),Eggman (01-28-2018),MetroMPG (01-28-2018),roscoe1972 (01-28-2018),Top_Fuel (01-28-2018)

  9. #5
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio ☼
    Country
    United States
    Posts
    4,407
    Thanks
    2,666
    Thanked 1,131 Times in 838 Posts
    mitsumi nice write-up.

    Quote Originally Posted by mitsumi View Post
    So, the problem was when i was driving i heard something snapped... then my clutch would'nt work anymore but luckily i was already near our place and had to push my mirage until i reached our front gate
    Good thing Mitsubishi built this car light haha. I've pushed my Speck and found it easy to push around.

    Quote Originally Posted by mitsumi View Post
    the only problem now is I dont know how to adjust the cable the way it was setup before. I know where the adjustment knob is, but i dont know if when is enough and too much when adjusting the cable. Hope someone can help me
    There is a thread here on the forum by Alpha_One called HOW TO: Adjust clutch engagement point - Mitsubishi Mirage / Space Star It's one of the earliest threads on the forum, dating back to February of 2013. Alpha_One put up some great photos (like yourself ). It's an easy step-by-step tutorial. Throughout the short thread other members include their knowledge and experience in setting a clutch.

    Later on in the thread I found and posted the procedure from the service manual which is even simpler and more straightforward: Service manual: clutch adjuster

    mitsumi I'm not sure if you have a copy of the service manual. It is available online and the adjustment procedure (among other things...) is covered.

    The adjustment is very simple but I suggest that it could have saved your clutch cable from falling apart. I wonder if the clutch adjustment was set to that when your clutch pedal was at it's end of travel, it was pulling hard on the clutch throwout bearing instead of the clutch pedal resting on the floor of the passenger compartment. Putting that much tension on on the clutch cable could lead to it separating the way it did. Can't tell for sure at this point so it's all speculation.


    Thanks for taking the time to share this with us all.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 50.1 mpg (US) ... 21.3 km/L ... 4.7 L/100 km ... 60.2 mpg (Imp)


  10. The Following User Says Thank You to Eggman For This Useful Post:

    mitsumi (01-28-2018)

  11. #6
    Senior Member
    Join Date
    Mar 2017
    Location
    Minnesota
    Country
    United States
    Posts
    532
    Thanks
    186
    Thanked 148 Times in 102 Posts
    Quote Originally Posted by Eggman View Post
    mitsumi nice write-up.

    Good thing Mitsubishi built this car light haha. I've pushed my Speck and found it easy to push around.

    There is a thread here on the forum by Alpha_One called HOW TO: Adjust clutch engagement point - Mitsubishi Mirage / Space Star It's one of the earliest threads on the forum, dating back to February of 2013. Alpha_One put up some great photos (like yourself ). It's an easy step-by-step tutorial. Throughout the short thread other members include their knowledge and experience in setting a clutch.

    Later on in the thread I found and posted the procedure from the service manual which is even simpler and more straightforward: Service manual: clutch adjuster

    mitsumi I'm not sure if you have a copy of the service manual. It is available online and the adjustment procedure (among other things...) is covered.

    The adjustment is very simple but I suggest that it could have saved your clutch cable from falling apart. I wonder if the clutch adjustment was set to that when your clutch pedal was at it's end of travel, it was pulling hard on the clutch throwout bearing instead of the clutch pedal resting on the floor of the passenger compartment. Putting that much tension on on the clutch cable could lead to it separating the way it did. Can't tell for sure at this point so it's all speculation.


    Thanks for taking the time to share this with us all.
    That's awesome there is a service manual. Is there one for 17s?

  12. #7
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio ☼
    Country
    United States
    Posts
    4,407
    Thanks
    2,666
    Thanked 1,131 Times in 838 Posts
    Quote Originally Posted by Pryme View Post
    That's awesome there is a service manual. Is there one for 17s?
    I haven't heard of one. If you can find one let us know.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 50.1 mpg (US) ... 21.3 km/L ... 4.7 L/100 km ... 60.2 mpg (Imp)


  13. The Following User Says Thank You to Eggman For This Useful Post:

    Pryme (02-10-2018)

  14. #8
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio ☼
    Country
    United States
    Posts
    4,407
    Thanks
    2,666
    Thanked 1,131 Times in 838 Posts
    I moved the thread to Engines & Transmissions and added it to the DIY list.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 50.1 mpg (US) ... 21.3 km/L ... 4.7 L/100 km ... 60.2 mpg (Imp)


  15. The Following 2 Users Say Thank You to Eggman For This Useful Post:

    Daox (01-29-2018),mitsumi (01-28-2018)

  16. #9
    Administrator MetroMPG's Avatar
    Join Date
    Jan 2013
    Location
    1000 Islands, Ontario
    Country
    Canada
    Posts
    6,719
    Thanks
    2,226
    Thanked 1,880 Times in 1,150 Posts
    mitsumi - thanks for the DIY!

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage base ES 1.2 manual: 54.0 mpg (US) ... 23.0 km/L ... 4.4 L/100 km ... 64.9 mpg (Imp)


  17. The Following User Says Thank You to MetroMPG For This Useful Post:

    mitsumi (01-28-2018)

  18. #10
    Senior Member Cobrajet's Avatar
    Join Date
    May 2015
    Location
    Olympia, WA
    Country
    United States
    Posts
    1,551
    Thanks
    553
    Thanked 823 Times in 490 Posts
    Great post! Generally, you will want to adjust the cable until there is 3-4 mm of slack at the clutch release lever.

  19. The Following 2 Users Say Thank You to Cobrajet For This Useful Post:

    Daox (01-29-2018),mitsumi (01-28-2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •