DIY: Installing a Daox cruise control kit & enabling in ETACs

[Jogard101]

Does anyone have a source for the X-horse drivers and ETAC Decoder software?
No download links are functioning for me.

[88coltturbo]

yes you could, be ware that some clock springs do not contain the required wires for the oem steering wheel buttons. read more at post #44 here https://mirageforum.com/forum/showth...ll=1#post82458

I was able to install the switch, as the wiring was already there. Now I have to get someone to enable the ETACS, and confirm the my pedal switches don't need anything.

[lepper]

Sorry to revive an old threah. i've been trying to do this on my 2018 EU spec mirage/space-star

However, since i have start-stop fucntionality, the clutch switch is already there. The downside is, my brake switch only has 2 wires coming from the little white plug. and the part number that was referred to here, doesnt fit the plug at all its completely different.

i managed to do my programming already. so that's taken care of. im pretty sure the only thing left to do is figure out how to fix the brake switch, so that it gives the required signal.

[Wheelman60]

I'm using the MEDIC4 at the mitsubishi dealership I work for. Cruise control isn't listed on ETACS, it's listed on MFI and there's no customization nor parameter change that can be made. Using special function there is no option for changing the parameters to recognize cruise control.

[Wheelman60]

Attachment 24592

[000]

Does anyone have a source for the X-horse drivers and ETAC Decoder software?
No download links are functioning for me.

I would really appreciate if anyone has info on this as well? I've got everything installed, bought the cable and got ETACS running but cannot seem to find the correct drivers. I've downloaded so many but none are working for me... This is driving me nuts. If I can't figure it out soon I will just take my car to a mechanic who can hopefully just figure it out for me.

[FreeYourSOUL]

I would really appreciate if anyone has info on this as well? I've got everything installed, bought the cable and got ETACS running but cannot seem to find the correct drivers. I've downloaded so many but none are working for me... This is driving me nuts. If I can't figure it out soon I will just take my car to a mechanic who can hopefully just figure it out for me.

https://www.facebook.com/groups/mmco...1452624565033/

[Morphector]

if anybody is looking for the parts on the cheap Aliexpress has them

[sunbeam]

Bumping thread as well, wanting to add cruise control to 2023 mirage manual.

This to me is the only limitation of the car.

Does anyone have experience with the ETACS writing / xhorse drivers / miniVCI cable purchase?
Thinking about buying a junked ECU to try on before attempting to reflash the vehicle.