Results 1 to 5 of 5

Thread: 3A92 fuel injector specs & flow rate

  1. #1
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,483
    Thanks
    2,412
    Thanked 1,395 Times in 816 Posts

    3A92 fuel injector specs & flow rate

    I'm on a hunt to find out the 3A92 fuel injector specs, primarily flow rate. I would mainly like to know this for the nitrous oxide system that I am building for the Mirage. But, its also great info for anyone doing engine modifications.

    I've searched the service manual for the flow rate data with no luck. There is no test procedure in it to measure flow.

    Next up, I contacted several fuel injector cleaning and servicing companies. They do not have access to this info. Apparently they just test the flow rate when they service the injectors and report it back to you.

    I also contacted a couple Chinese manufacturers of fuel injectors on ebay that are selling 3A92 replacement fuel injectors. So far, they've only said 'they're the same as the original injectors'... haha, not real helpful.

    I do know that these are the same injectors used on the 4A92 engine which is the 4 cylinder version of our 3A92. This was used on the Lancer, ASX, and a few other models outside of the US.

    If any of you have any additional info on the fuel injectors, I'd love to hear it. If anyone has an extra fuel injector kicking around, I will pay for you to send it in to a lab to have it flow tested.


    Just for a bit more info for this thread:

    Here are the markings on the fuel injectors. The Mitsubishi part number is 1465A331. I am not sure what KMN230B is, EAT320, or that other long string of numbers.

    Name:  mirageInjector.jpg
Views: 75
Size:  90.0 KB

    Name:  mirageInjector2.jpg
Views: 75
Size:  90.6 KB

    Name:  mirageInjector3.jpg
Views: 77
Size:  90.7 KB



    If we zoom in on the picture, it looks like our injectors have 10 holes in them.

    Name:  mirageInjector4.jpg
Views: 75
Size:  29.7 KB


    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 45.7 mpg (US) ... 19.4 km/L ... 5.1 L/100 km ... 54.9 mpg (Imp)


  2. #2
    Senior Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    203
    Thanks
    62
    Thanked 71 Times in 43 Posts
    A few months back, I replaced my injectors. I bought them on Alibaba from Guangzhou Super Technology: https://chaopei.en.alibaba.com/

    I was in contact with many distributors and was able to haggle a good price for the set: $12/piece + $24 shipping = $60. I thought that was a good price, seeing that most domestic distributors wanted well over $100/piece. I immediately noticed a significant bump in MPG from the new injectors. I assumed there was a loss in flow rate, but I did not notice a loss of performance. However, coming down from high speeds, the curb idle drops to almost stalling...sometimes. I have no good idea on why this is. But, I had a noticeable gain in MPG (other maintenance at the same time may have a contributing factor to the improved MPG) and figured it was worth the trade-off...if you could call it that. Heres some pics:

    (10 holes are pretty clear here)
    Name:  1465A331+%282%29.jpg
Views: 59
Size:  15.4 KB

    Name:  1465A331+%284%29.jpg
Views: 58
Size:  32.2 KB

    Name:  1465A331+%283%29.jpg
Views: 58
Size:  74.5 KB

    I will send you my OEM set for analysis. Though, I think these new injectors may deserve another look as well.
    Last edited by Qrush; 01-12-2019 at 10:31 AM.

  3. The Following User Says Thank You to Qrush For This Useful Post:

    Daox (01-12-2019)

  4. #3
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio ☼
    Country
    United States
    Posts
    4,955
    Thanks
    2,843
    Thanked 1,271 Times in 950 Posts
    Quote Originally Posted by Qrush View Post
    A few months back, I replaced my injectors. I bought them on Alibaba from Guangzhou Super Technology: https://chaopei.en.alibaba.com/

    I was in contact with many distributors and was able to haggle a good price for the set: $12/piece + $24 shipping = $60. I thought that was a good price, seeing that most domestic distributors wanted well over $100/piece. I immediately noticed a significant bump in MPG from the new injectors. I assumed there was a loss in flow rate, but I did not notice a loss of performance. However, coming down from high speeds, the curb idle drops to almost stalling...sometimes. I have no good idea on why this is. But, I had a noticeable gain in MPG (other maintenance at the same time may have a contributing factor to the improved MPG) and figured it was worth the trade-off...if you could call it that. Heres some pics:

    (10 holes are pretty clear here)
    Qrush, why did you replace your injectors? Were you having problems with your original set?

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 50.0 mpg (US) ... 21.3 km/L ... 4.7 L/100 km ... 60.0 mpg (Imp)


  5. #4
    Senior Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    203
    Thanks
    62
    Thanked 71 Times in 43 Posts
    Quote Originally Posted by Eggman View Post
    Qrush, why did you replace your injectors? Were you having problems with your original set?
    Not really. Miles were about 120k and price was right. Figured i would give it a go. MPG's got a bump so I cannot complain.

  6. #5
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,483
    Thanks
    2,412
    Thanked 1,395 Times in 816 Posts
    Awesome, thanks!


    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 45.7 mpg (US) ... 19.4 km/L ... 5.1 L/100 km ... 54.9 mpg (Imp)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •