To install my new front grill, i had to remove my front bumper:
Itīs a quick 10 minute job you can do in your driveway.
There are 3 clips in each wheel well ( Picture 1 )
4 10 mm Bolts on top of the Bumper ( Picture 2 )
2 10 mm Bolts in front of the bumper ( Picture 3 )
from underneath there are 2 12mm Bolts, 4 clips ( 2 on each side )
and 3 clips in the middle of the bumper ( Picture 4+5 )
I also removed the fog lamps, the covers are cliped on, the lamps
itself are with 3 screws instaled ( Picture 6 )
Remove all clips and bolts then grab the bumper on one side and pull it from its
holder. It should easily pop out, do the same on the other side.
Then grab the bumper on top and pull it of the car.