Edit:
Hi!
So i bought a new radio for my 2013 Mitsubishi Space Star/Mirage to replace the pretty ****ty slow factory touch screen and old nav with one that has Android Auto/CarPlay support.
So i would like to retain the factory reverse camera on the aftermarket radio that only has RCA input for reverse
The factory radio has a 5 pin connector for (i think) only video feed because when i unplug that the video become black but the screen is still in reverse mode.
So the reverse sensor/signal/trigger wire is somewhere in the main power connector
Are there any wiring diagrams availbe so i know which wires are which from both the main power connector and video input connector I can't really find any info about the factory MMES E-11 radio (part nr 8750A266)
Here's a album with some photos of the radio and the connectors
https://imgur.com/a/m4MgqDs
I already have a stepdown converter because as you guys said the factory camera is 6v
Thanks in advance
Edit: this is the new radio that is got https://www.aliexpress.com/item/3301...1ad84c4dXj4JNm that already got a harness for it