Results 1 to 5 of 5

Thread: How to retain factory reverse/backup camera on aftermarket unit

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member klotespacestar's Avatar
    Join Date
    Jan 2019
    Location
    Amsterdam
    Country
    Netherlands
    Posts
    9
    Thanks
    6
    Thanked 3 Times in 2 Posts

    Question How to retain factory reverse/backup camera on aftermarket unit

    Edit:

    Hi!

    So i bought a new radio for my 2013 Mitsubishi Space Star/Mirage to replace the pretty ****ty slow factory touch screen and old nav with one that has Android Auto/CarPlay support.

    So i would like to retain the factory reverse camera on the aftermarket radio that only has RCA input for reverse

    The factory radio has a 5 pin connector for (i think) only video feed because when i unplug that the video become black but the screen is still in reverse mode.

    So the reverse sensor/signal/trigger wire is somewhere in the main power connector

    Are there any wiring diagrams availbe so i know which wires are which from both the main power connector and video input connector I can't really find any info about the factory MMES E-11 radio (part nr 8750A266)

    Here's a album with some photos of the radio and the connectors
    https://imgur.com/a/m4MgqDs

    I already have a stepdown converter because as you guys said the factory camera is 6v

    Thanks in advance

    Edit: this is the new radio that is got https://www.aliexpress.com/item/3301...1ad84c4dXj4JNm that already got a harness for it
    Last edited by klotespacestar; 08-12-2019 at 03:26 PM.

  2. The Following User Says Thank You to klotespacestar For This Useful Post:

    dspace9 (07-13-2019)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •