Mitsubishi sure knows how to deter you from modding.
Pulling out the fuse to put in a fuse tap was the hardest part.
I will probably swap out my springs for kyb.. Keep on bottoming out
Btw.. Used this for a junction lead for wiring... Soldered and crimped the 2 leads for the drl's to the 2 holes in the female spade.. Instant junction.. Easier than doing a soldered t-junction
Cheapo CF antenna..
So i decided to put in some LED reverse lights.
I did notice there is a bit of flicker but would not call it hyper flashing.. You guys think its beacuse of an unstable voltage/current?