Hey everyone. Just a few things to note. I'm the guy that made that YouTube video and I wanted to let all of you know that there are aftermarket fog light kits that are perfect fit for the Mirage that cost 1/3rd of the price. I think I paid maybe $40.00 for the kit, and it plugged right into the factory wiring.
I also want to let you know that you can turn on the fog light option without ETACS. I can say for certain that the OTC evolve and the Autel maxisys 908 both have it as an option to activate, so you can call around to local shops and see if they have those scan tools. It literally takes seconds to activate the option in both of them.
Lastly, if you want to add factory cruise, you will need to use Etacs. I haven't found an aftermarket scan tool that has that option.
I've had these installed about a year now and my ES is the most SE Mirage you will ever see! Love my little car!!
I can't seem to find the link to the set I bought, but you would never be able to tell the difference between them and OEM stock.
These will work in your headlight https://www.auxbeam.com/headlight-bu...ze/h4/gd001045
Unless the G4 headlights have different bulbs from the Hatchback version, the 9007 bulbs won't fit your headlight housing...but the H4 HB2 9003 bulbs will
Approved by the one and only MirageRally...lol
Not about fog lights but related. When I purchased my car, it was missing the left fog light cap. The salesperson said he's going to order the part. A month ago he said the part came but it's not the right one and he's going to have to contact Mitsubishi to get the right one. I don't think he actually ordered anything and not going to (typical salesperson who doesn't care after purchase is done). I'm thinking about removing the other cap and just leave 2 holes on the car. Is it safe? I don't think anything can get in the engine through those holes but I don't really know for sure...
The fog light cutouts in the bumper open into the engine compartment, directly in front of the wheel well splash guards. They are down very low, so I don't think anything entering in (dirt or water) will cause you any issue. IIRC almost everything directly below the hole is plastic/fiberglass so rust shouldn't be an issue, either.