TSB: PDI (Pre-Delivery Inspection)

[Eggman]

MANUFACTURER COMMUNICATION NUMBER: TSB-16-00-001
Components: EQUIPMENT
NHTSA ID Number: 10103126
Manufacturer Communication Number: TSB-16-00-001

Summary
THIS BULLETIN CONTAINS GENERAL PRE-DELIVERY INSPECTION (PDI) PROCEDURES, BOTH TECHNICAL AND DETAIL, FOR 2017 MODEL YEAR MITSUBISHI VEHICLES (EXC. I-MIEV AND OUTLANDER PHEV).

5 Affected Products

MAKE	MODEL	YEAR
MITSUBISHI	LANCER	2017
MITSUBISHI	MIRAGE	2017
MITSUBISHI	MIRAGE G4	2017
MITSUBISHI	OUTLANDER	2017
MITSUBISHI	OUTLANDER SPORT	2017

1 Associated Document
Manufacturer Communications
MC-10103126-0335.pdf 5252.395KB

MC-10103126-0335.pdf 5252.395KB
No: TSB-16-00-001
SUBJECT: GENERAL PDI PROCEDURES FOR 2017 MODELS (except EV and PHEV)

PURPOSE This bulletin contains general Pre-Delivery Inspection (POI) procedures, both technical and detail, for 2017 model year Mitsubishi vehicles (exc. i-MiEV and Outlander PHEV).
If required, additional Technical Service Bulletins will be issued for model-specific POI procedures.
Welcome Delivery folders, containing a Pre-Delivery Inspection form, and a Sales Delivery form, should be used for all PDIs. One is shipped to dealers inside each vehicle.
Note: Additional folders and forms may be ordered from Fontis Solutions by clicking the link on the main page of the MDL. If you need assistance with ordering or other information, contact them at 1-800-924-1350, or at https://mmna.imgps.com (Replaced by mitsubishi.deluxebrand.com)

Also found within the document: MitsubishiAcademy.com

[Eggman]

Post 2 reserved

[Eggman]

Post 3 reserved

[Eggman]

Post 4 reserved

[Eggman]

Post 5 reserved

[Eggman]

Post 6 reserved

[Eggman]

Post 7 reserved

[Eggman]

Post 8 reserved

[Eggman]

Post 9 reserved

[Eggman]

Post 10 reserved