__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
I just looked up a UK Mirage owner's manual. Depending on the atmospheric temperature, the following oil may be used in a Mirage -
0W-20
0W-30
5W-20
5W-30
5W-40
10W-30
10W-40
10W-50
15W-50
20W-40
20W-50
See page 10-5 of their owner's manual. If the UK owner's manual suggests only 0W-20 oil be used, I've missed it.
https://owners.mitsubishi-motors.co....s/OA0X19E2.pdf
One of the discussions that caught my attention was with a German forum member I believe. He's the one that claimed their owner's manual suggested -
0W-20 for mpg
5W-30 for better engine protection
Not knowing German, I didn't question him at the time. I only took a mental note of what he wrote for us. I can probably find that some time, but you already ignored his claim at the time anyways. Thus, I would go on believing only 0W-20 oil is recommended for a Mirage around the world if I were you. There's no harm in believing that I guess.
foama (03-17-2020)
Thanks Mark for the UK manual!
The Continental manual / German manual says:
Quickly translated are three points:
1) The first point is the temperature versus viscosity graph.
2) The first bullet under the graph says to use a viscosity matching the temp range. It also says 0W20, 0W30, 5W30 and 5W40 may be used if they comply with following minimum standards: A list of historic SAE and ACEA standards follows. (Listed are well known older standards, nothing special at all)
3) The second bullet under the graph says to only use oil that complies with following classifications:
Listed here are older API and ACEA quality ratings (not more stringent newer ratings!), and it also says to use ILSAC rated/certified oil. Current standard is ILSAC GF-5
Note:
If you want to check on your favorite oil-quality (oil quality = oil performance) rating or compare it with a different quality rating, you may want to check the link below. There you could compare the world's strictest quality standard "VW 50400" with whatever you prefer. For this reason I use an oil that complies with VW50400 standard because it has way better performance (=quality) than needed. This is also the "longlife engine oil" with the most stringent standard that typically needs changing between 30000km and around 50000km when used in VW cars with computed oil change intervals.
It is PAO-based and usually comes in 5W30 viscocity.
https://online.lubrizol.com/relperftool/pc.html
Last edited by foama; 03-17-2020 at 03:44 PM.
Top_Fuel (03-17-2020)
I understand that historically, motor vehicle manufacturers have associated engine oil viscosity with ambient temperature, in the sense that thicker oil corresponds with warmer temperatures. However, I don't recall Mitsubishi making the following claim in any of their literature:
I see one's preference for one viscosity or brand over another, but I can't find Mitsubishi's advice to use 5W-30 specifically for improved engine protection. Can you help me find the Mirage Owner's Manual that makes this claim?
I wouldn't want to draw a conclusion based on insufficient evidence.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
Dear Eggman, you will not find any Mitsubishi advice to use 5W-30 specifically for improved engine protection in any Mitsubishi manual!
I do not want to chime in to a long, fruitless laymen discussion, so here a brief answer:
It is established in various Mitsu manuals that our engines can run with practically every oil on the market that complies with current SAE / ACEA / ILSAC standards. See owners manual.
It is further established we can use 0W20 in ILSAC GF5 quality, see owners manual.
It is common and well established knowledge in the industry that that running this sort of oil has potential risks, and using for example, 0W30 or 5W30 gives a higher level of wear protection for the engine than 0W20. The mpg rating was established with this kind of oil ( 0W20). It is fantasic our cars can run with 0W20 without problems. Because it is so thin, mpg is better, but there are potential risks with such a thin oil, but our cars can handle that.
Because I want the engine to last long, it gets the by far highest quality oil available. This is any oil compliant with VW 50400 standard, the world's strictest. That exceeds by far any ACEA or SAE or ILSAC standard. I could use something different, but in this country I can buy it for around €5 per liter. Why should I use liquid rubbish at €3 per liter when I can get the world's best longlife oil for €5 per liter that was made to last roughly 30 000 to 50 000km and also gives the industrie's best wear protection. It is PAO based and usually comes in 5W30 viscosity.
You may want to check the link in post number 23 and compare oil qualities.
Last edited by foama; 03-17-2020 at 03:49 PM.
Top_Fuel (03-17-2020)
Just asking for the source of your claim. You originally said this is from the manufacturer, not "what others have claimed."
I've paid attention to the various discussions surrounding engine oil for these cars and figured I must have missed this significant little detail. I'm not against anyone using whatever they think is best for their situation.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
Beats obsessing over coronaviruses.
I guess I'll have to find another distraction.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)