Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11

Thread: My Turbo 3A92 Project

  1. #11
    Junior Member
    Join Date
    Apr 2020
    United States
    Thanked 34 Times in 12 Posts
    Got the head back from the machine shop the other day. Looks good, most of the work was done on the intake side, with a little bit of smoothing out on the exhaust side. For those wondering the new springs came from a nissan KA24. Head bolts were not changed out. For those curious what the torque is with the manual spec 24.5 nm + 180 degrees. It amounts to only about 35lb ft of torque or close to. I increased this number just a tiny bit.

    Name:  21007099-1B81-4F06-9132-C905936F7B2D.jpg
Views: 24
Size:  92.5 KB
    Name:  F34A6117-CBAE-4A03-974B-1655486AFBD7.jpg
Views: 23
Size:  82.2 KB
    Name:  A5327C4B-C8D6-4D04-8333-A5B3BDFC651E.jpg
Views: 23
Size:  92.0 KB
    Name:  A4A9A6A9-7CC9-4EF3-8EFC-3DC6987030B1.jpg
Views: 22
Size:  95.8 KB

  2. The Following 5 Users Say Thank You to DirtGearTv For This Useful Post:

    2of9 (10-26-2020),Daox (10-25-2020),inuvik (10-25-2020),Loren (10-25-2020),mitsumi (10-25-2020)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts