Depending on the diameter, I might be able to use this engine to power a ight plane...It could be found by measuring the bolts on the crankshaft flange, or the flywheel....
Thanks.
Charlie
Turbo Honda Kitplane.
Depending on the diameter, I might be able to use this engine to power a ight plane...It could be found by measuring the bolts on the crankshaft flange, or the flywheel....
Thanks.
Charlie
Turbo Honda Kitplane.
Can someone share a link of a document that states what the diameter of the crankshaft bolt circle is for a 2019 1.2 Mirage engine.
Thanks.
Charlie
Moderator’s note: combined with existing thread.
Hello Charlie and welcome to the forum. I’m sorry that no one has answered your question.
I combined your two threads because it's better organized to keep the discussion to one thread than two or more. Future searches become more and more difficult when searching for answers to any particular subject.
I don't think anyone has posted this information here on the forum. Have you looked into the Service Manual?
Last edited by Eggman; 08-08-2021 at 01:23 PM.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
No worries. Just it's a subject that doesn't come up often and I can't imagine someone who will separate their engine and transmission to make this measurement. Throwing out some options, it might be possible to have a junkyard measure it. Whoever gets this info, it would be good to share it here for future reference. Forum member DirtGearTv has put this drivetrain in a off-road buggy and turbocharged it, so a lightweight airframe isn't totally out of the question. Reliability would be a question though, especially way up in the air. The Mitusbishi 3A92 wasn't exactly designed with flight in mind, was it?
Last edited by Eggman; 08-08-2021 at 02:08 PM.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
Not sure about the specs changing over the years, bit of information in this thread
https://mirageforum.com/forum/showth...Flywheel/page2
CRANKSHAFT INTERFACE:
Bolts - 6
Bolt Circle - 68mm Center-to-Center
Bolt Hole - 11.3mm
Bolt Size - M10 x 1.0 x 25mm
PRESSURE PLATE:
Bolts - 6
Bolt Circle - 218mm Center-to-Center
Bolt Size - M6 x 1.0 x 12mm
Pins - 3
Pin Diameter - 6mm
2018 Mirage
__________________________________________
View my fuel log 2018 Mirage GT 1.2 automatic: 38.0 mpg (US) ... 16.1 km/L ... 6.2 L/100 km ... 45.6 mpg (Imp)
charosenz@msn.com (08-08-2021),Eggman (08-08-2021)
Thanks craigq.
Here’s the link to the post with this info.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
craigq (08-08-2021)