Suspension & brake aftermarket parts index

[cyclopathic]

That's what I want to know.. If they have adjustablilty I will dump my tien.

I cant wait for this.. just ordered a set of street basis lol. This is a daily driver 3-poter is a compliment to TSi. Need to get it good enough to not have too many OMFJ moments in switchbacks.

[mousee]

Anyone care to furnish the empty ones that I couldn't find?

Make	Part Number	Part Description	Spring Type	Spring Rate	Height Change to Stock	Forum link	Estimated Price
BC Racing	B-32-VN	BC Racing V1 Coilover Kit		(F)4K (R)2.4K	(F) -25mm (R) -25mm		RM3200
Eibach	E10-60-017-01-22	Pro Kit Springs	(F)Linear (R)Progressive	(F)2.7K (R)2.29K	(F) -30mm (R) -30mm	link
GAB	GSS-MIT027	SS Fully Adjustable Coilovers		(F)5K (R)2.5K		link	RM2600
H&R	28831-1	Sport Springs		(F)3.13K (R)3.66K	(F) -30mm (R) -30mm	link
King Springs	KCFL-32	Front Lowering Coil Springs			(F) -30mm
King Springs	KFRL-71	Rear Lowering Coil Springs			(R) -30mm
Largus	01011206018	Spec S Coilover Kit		(F)4K (R)2.5K	(F) 0mm (R) -20mm
RS-R	B200D	Lowering Springs		(F)2.7K (R)2.24K	(F) -25mm (R) -30mm	link
Silver's	NM121	NeoMax Coilovers		(F)4.5K (R)3.2K			RM2650
Tein	GSE46-11AS2	Street Basis Coilover Kit		(F)3K (R)2.1K	(F) -45mm (R) -40mm	link	RM2450
Tein	SKE46-G1B00	High Tech Drop Spring Kit		(F)2.5K (R)2.1K	(F) -30mm (R) -30mm	link	RM1200
Ultra Racing	UR-LA4-2026	Front Lower Bar/ Member Brace				link,install	RM280
Ultra Racing	UR-TW2-2024	Front Strut Bar/ Tower Bar				link	RM220
Ultra Racing	UR-AR19-422	Rear Anti-roll Bar/ Sway Bar				link,install	RM450
Ultra Racing	UR-RL4-2027	Rear Lower Bar/ Member Brace				link	RM280
Ultra Racing	UR-RE2-2025	Rear Strut Bar/ Tower Bar				link, install	RM180
Ultra Racing	UR-RT2-2028	Rear Torsion Bar/ Frame Brace				link	RM165

[inuvik]

Great info!

[mousee]

I just installed the V1 set from BC Racing. Briefly drove it around. Front damper currently set at 15notch (exactly middle of the range), Rear damper set to softest. 25mm drop was almost the minimum drop, I tried to retain the ride height, but that's about as good as I can get.

Handling was much improved. Body roll was reduced significantly, body roll still noticeable in the front-end. I will be installing UltraRacing Front strut and all braces this week. No more bottom out at the back even with 150kg payload. It is stiff... like.. very stiff... It probably wouldn't be very comfortable going beyond that stiff.

Will drive it around for a week or so and recheck the settled in height and perform wheel alignment.

At this moment (just newly test drove this set of suspension), if I get to customised my spring rate, I would probably pick something around 3.4kg/mm on the front, and 2kg/mm on the rear.

[cyclopathic]

You have UR-AR19-422 listed for RM450.. where?? this is 116 USD

[Teasmade]

Excellent thread - Thanks for putting it all together!

[mousee]

USD116 is almost RM450 bro... That quotation was direct from UR factory, cash and carry.

[cyclopathic]

USD116 is almost RM450 bro... That quotation was direct from UR factory, cash and carry.

Maybe you should get a few and sell it on eBay or Amazon for <$200 delivered

[mousee]

I wish I could.. The sad part is shipping to the states cost a bomb from Malaysia! haha..

[Littlestan]

Ordered and installed this set of Amazon springs:

http://www.amazon.com/gp/product/B00QLTTWU8?psc=1&redirect=true&ref_=oh_aui_detailp age_o01_s00

Fronts are decent and work well, definitely an improvement over stock as it takes out most of the sway,
but the rears are garbage. Check out my review to see what I mean. I also updated my garage.

Going to hit up my local auto recycler for a set of springs off a 2000 Beetle with a 1.8L. Should
stiffen everything up nicely, I'm hoping.

EDIT: My review on Amazon is pending for approval, shouldn't be long though.