Search:

So, I've done it.

I found a rear bumper from a wrecked 2021 mirage in the exact same color as my mirage.
I tried fitting it today and it fits perfectly:
24307
So now I've got to fix the little...

I would definitely take out the air bag (don't forget to unhook te battery) and paint mask it properly and just use some silver spray paint to paint it.
This is something that you see every time you...

Finally mounted the wheels I've been re-doing since march this year.
195/45/16 tires on a 7j 16 inch set of rims
24177
24178
24179

They do need some centre caps, looking to 3d-print them, but...

I own a little 3d-printer aswell, a renkforce rf100. I've printed some stuff for in the house, but also for my mirage.
The hubcaps (not sure if it's the right word) are 3d-printed (out of PLA) and...

After my girlfriend hit a kerb, my front left wheel is bent, and I need a new set of wheels.
So I bought a set that I am repairing but I am not sure what color I want them to be.

The old wheels...

Today I finished my exhaust "project".
Deleted the resonator and the final part of the exhaust is now 1.75" instead of 1.5"
Sounds good to me, no annoying sounds.

https://youtu.be/6gJCy7TYPTM...

Yesterday I applied some bitumen to my car, lot of work, but definitely worth it!
The car is almost as quiet as our 2015 mondeo.
I did the floor and all the doors.

Before(dont mind the wiring):...

Over the last two weeks I have been working on my wheels, which I fully repaired and painted:

How they looked before:
20676

How they look now:
20677

I was doing some research and came across this magnificent render:

https://www.topgear.com.ph/features/feature-articles/mitsubishi-mirage-evo-render-a2588-20210106



Can't imagine mitsubishi...

I've searched a little further, and found some more info in the wiring sheets:
20564
Would it be as easy as putting a switch in between the wiring or is there some software preventing me from doing...

I had the same issue with my windows fogging up massively, and I took some shaving cream(the spray foam), en with a paper towel, just rub it into the glass. Never had the issue again.

I ordered some orange vinyl from Aliexpress, and wanted to wrap the silver part around the switch panels, just to get some color in the car.
I tried wrapping them while the switch panels were on the...

Yesterday I put myself a new intake together because I wanted to sound it a bit more "sporty"

I first removed the old airbox:
19675
Then I made a bracket to hold the new intake, and test fitted...

You can also get a normal rgb led strip, solder 3 resistors to the R,G and B wires (I used 3 pot meters to find out which resistors I needed), clip them onto a 12v rail(I would suggest those from...

If you want to be able to turn your sub on and off, just use a wire between your 12v and remote input on your amp, and add a switch to it. I bought one of those large switches and drilled a hole in a...

18641
They are just sortof screwed in. There are two caps which fit perfectly in the existing holes, and with some force you put the springs in.

Hello everyone!

Been in this forum for half a year (bought mine as my first car in january) but never felt like posting it.
Here is my mirage 1.2 ES and all the things I have done to it.
...