Originally Posted by
mohammad
I remember seeing a thread on here about how to buy cheap sway bar end links in canada but cannot seem to find it?
In general is their any meaningful difference between the cheap(15 ish each) and expensive (44+) options at a place like NAPA?
Mine look rusty AF are they going to be easy to remove?
If I replace end links should I also replace bushings? can bushings be replaced without removing the end links? Id like to do both if they can't be as the thread locker on end links is "one time use"
Find a few part numbers and use google. Or try partsavatar. As for price, I've never bought cheap and expensive ones and compared the two. I'd go the cheap route because cheap car.
It should be easy to remove those old ones, just cut them off and install new ones. Easy.
I wouldn't bother with the sway bar bushings. If it ain't broke...You could probably replace them without removing the end links if you wanted to though. You can usually reuse the hardware on those end links if they're not a solid chunk of rust like yours. If in doubt use some thread locker.
Last edited by Fummins; 09-29-2023 at 01:25 PM.
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)