I know 3 bangers are known for their vibration, but still, with so many DIYers/modder guru out here... is there a way to reduce it? EnergySuspension bushings maybe or that would actually transfer all the shakes into the cabin..?
I know 3 bangers are known for their vibration, but still, with so many DIYers/modder guru out here... is there a way to reduce it? EnergySuspension bushings maybe or that would actually transfer all the shakes into the cabin..?
__________________________________________
View my fuel log 2015 Mirage ES 1.2 automatic: 40.5 mpg (US) ... 17.2 km/L ... 5.8 L/100 km ... 48.6 mpg (Imp)
Daox (12-06-2016)
The 2014's have the least amount of dampening in the motor mounts...right?
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 52.2 mpg (US) ... 22.2 km/L ... 4.5 L/100 km ... 62.6 mpg (Imp)
__________________________________________
View my fuel log 2015 Mirage ES 1.2 automatic: 40.5 mpg (US) ... 17.2 km/L ... 5.8 L/100 km ... 48.6 mpg (Imp)
Top_Fuel (12-06-2016)
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 52.2 mpg (US) ... 22.2 km/L ... 4.5 L/100 km ... 62.6 mpg (Imp)
Do you know if that's a direct fit?
And if anyone have some pictures, can they post some picture of the 2017 mount? I'd like to look at the design, maybe they just added more rubber, and if that's the case, using aftermarket ES bushing might be the way to go. I've ES bushing everywhere on my Integra and loved it hehe...
__________________________________________
View my fuel log 2015 Mirage ES 1.2 automatic: 40.5 mpg (US) ... 17.2 km/L ... 5.8 L/100 km ... 48.6 mpg (Imp)
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
Ok, I found the difference between 2014 and 2015.
Majority of the mounts remained the same, the only thing changed in 2015 was one of the mounting rod.
2014 - ENGINE / ENGINE / TRANSAXLE / ENGINE & TRANS MOUNTING / Rod / [7] Part Number: 1092A096
https://mitsubishiparts.net/parts/20...iagram=6214160
2015 - ENGINE / ENGINE / TRANSAXLE / ENGINE & TRANS MOUNTING / Rod / [7] Part Number: 1092A034
https://mitsubishiparts.net/parts/20...iagram=6214160
For those who have the 2015 Mirage, can they take a picture of their mounting rod? I've a feeling that they just beefed up the rubber in there, if that's the case, I can either swap it out with ES or just buy some polyurethane and fill it up.