Hello everyone!
I have got a 2019 Space Star (European Version of Mirage) with 1.2L and with the highest equipment called "Invite".
I really love the car but im missing the cruise control and i got very angry that the 2020 and 2021 have a faktory one so i decided to go ahead and try adding it in. The threads that already are here realyy helped me out a lot but i am just about to quit so i decided to write to you guys.
I did the following:
1) Bought a CC switch from a 2015 ASX
2) Flashed the ECU with MMCodingWriter (the two CC settings in the engine compartement)
3) Checked if i have the necessary Clutch and Brake switches (both where already build in brake has 4 Pins)
4) Bought a new clockspring form a 2019 Space Star with 10 pins and swapped the Angle sensors. (After install everything was working fine, no checklight or alarms)
Afterwards i tried it and it didnt work. CC and the Led both didnt function. So i took myself some time to do some troubleshooting and it seem as the necessary cable to the Pins of the ECU are there and there is 5V on one of the two cables behind the clockspring. I also checked the cable in the steering wheel and i had connecntions.
I am going to attach some pictures for you guys.
i hope you can help me i tried everything but i am not going to give up on this! I thought (because the cables where already there, that this was going to be plug and play but well...)
Thanks!