What can I say.
A leak led to to spend 5 hours on fathers day changing shoes along with painting the drums.
I let 30 mm bolts hold me up checking this our like over a year.
I heated this pass side bolt and was able to do the driver side without heated
WHY did I waited too long
I did the front pads a week ago and that was no big deal BUT still did not give me the break feel I knew I should have had.
I pulled both drums off and did one side at a time so I could look at the other side to know where the springs go.
Of course I could have just looked at the photo above if only one side needed to be done.
Good luck with your break job.