Agreed - nice work.
My favourite pic:
-EZ lip pro side skirt and bumper lip
-Auto dynasty/Speed Daddy lowering springs
-Enkei RPF1 15x7 41mm offset
-Nexen SU1 summer tires 195 45 R15
-Carbon fibre wrapped hood, VVIVID brand
-Shark fin antenna
-Titanium Lug nuts 13g each
-5% rear passenger window tints. 25% VLT front driver sides. VVIVID tints
-Rear universal diffuser.
-underbody rubberize rust coat, partially done. Its an ongoing project.
-painted the calipers with annonized high heat glossy red
-Speed Daddy Ebay Springs (FOR SALE!)
-installed a philips engine block heater
NOTE: all upgrades were installed by myself. Except tire to rims install and balancing. I did the tints, hood wrap, diffuser install, antenna swap, Underbody rubberized rust coat... etc
-Rear diffuser
https://rover.ebay.com/rover/0/0/0?m...2F182951733803
-ez lip on the side and front bumper
https://www.ezlip.com/product/ez-lip-pro/
-Carbon Hood wrap and gas cover.
https://www.amazon.ca/gp/product/B00L9J4L6A/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
-Shark fin antenna installed
https://www.ebay.ca/itm/White-Auto-Car-Exterior-Roof-Shark-Fin-AM-FM-Radio-RV-Signal-Aerial-Antenna/153056237463?hash=item23a2dcd797:g:j1EAAOSwnTpbHE3 h
-Vvivid 5% tints and 25% tints high quality, Made in Canada: https://www.ebay.ca/sch/instawraps/m.html?_nkw=&_armrs=1&_ipg=&_from=
-Led Lights (Headlights, license plate, reverse lights, daytime running light)
-Vortex generator fins sticked on the spoiler.
-Benen rear tow hook
-Rear Stepsill
Mirage floor mats
Dashboard cover
Led dome light 31mm
Stock Head unit with android auto display
JBL GTO629 180W front
JBL GX602 180W rear
-Sprayed rubberized undercoating in the wheel wells, and underneath the car too.
-Engine block heater
-Red annonized metalic caliper painted
-K&N RG-1001RD Air filter
-Mobil 1 Extended performance with m1-110 oil filter
-CVT fluid from Canadian tire
https://www.canadiantire.ca/en/pdp/oem-synthetic-cvt-asian-atf-946-ml-0281543p.html#srp
-Rear Resonator delete
-Godspeed coilovers
-Daox rear Antiroll bar/Sway Bar
-eibach Coilovers protector cover
-Titanium lug nuts
https://www.twmperformance.com/lug-nuts/titanium-lug-nuts
(2018)
-Enkei RPF1 15x7 41mm offset
-Nexen SU1 summer tires 195 45 R15
(2019)
-185/65R14 winter tires with 3mm hub-centric front wheel spacer
-plastidip wheel covers
-165/65R14 stock ensave with 25mm hubcentric wheel spacers
-Rear Fender rolled
Agreed - nice work.
My favourite pic:
__________________________________________
View my fuel log 2014 Mirage ES 1.2 manual: 62.4 mpg (US) ... 26.5 km/L ... 3.8 L/100 km ... 74.9 mpg (Imp)
Alemon (12-22-2018)
New k&N Cold air intake mod
https://youtu.be/vlOrbqsvK3U
You can hear the mirage growl in the video with stock exhaust setup.
Parts needed:
K&N RG-1001RD Universal Chrome
https://www.amazon.ca/dp/B00AFRIVNQ?r...
OR
https://rover.ebay.com/rover/0/0/0?mp...
Mitsubishi Mirage Mass Airflow Sensor Housing 2014, 2015, 2017, 2018 Aftermarket Custom Cold Air Intake MAF Adapter 1.2L
https://www.amazon.com/dp/B072LNMKDW/...
OR
https://mirageforum.com/forum/showthr...
3” intercooler Aluminum Pipe
https://rover.ebay.com/rover/0/0/0?mp...
HPS 2” to 3” coupler
https://rover.ebay.com/rover/0/0/0?mp...
2” and 3” Hose clamps
I found a winter tire set for $25 for all on kijiji, with a considerable rust on it and 3 seasons left from the tread but its hard to turn down an offer.
My setup now is 185/65/14 with 3 mm hub centric wheel spacer at the front.
Last edited by Alemon; 04-09-2019 at 05:04 PM.
inuvik (03-29-2019)
https://youtu.be/WAOTRpXF4sE
Front have the stock speakers and rear have the JBL installed. On a Mitsubishi Mirage Hatchback 2018. The Head unit is stock. It is louder, much clearer, and the bass has more punch. The stock speakers on the rear was fabricated to fit the JBL.
Last edited by Alemon; 04-09-2019 at 05:03 PM.
Godspeed and Speed Daddy are not mentioned here: https://mirageforum.com/forum/showth...ull=1#post4511
Would you mind supplying info to Doax or whomever could update it?
Last edited by Dark Magenta; 04-09-2019 at 05:39 PM.
This car can take up to 30cm wheel spacer at the rear. The front can definitely take more. I rolled the fenders at the rear since it is rubbing too much with load/passengers at the rear which may potentially damage the sidewall of the tire. I have the stock 165/65R14 with the 25cm spacers on all four hubs. Only the rear requires fender rolling.
I got the spacers from this seller:
https://ebay.ca/usr/wsa-auto
The quality is excellent and theres no vibrations so far. Handling has improved drastically compared to the stock width track
Last edited by Alemon; 05-01-2019 at 03:13 AM.
MetroMPG (07-03-2019)
These looks great! It has the leather feel to it and highlights of red. It changes the look of the interior and gives it more appeal! Perfect fitment too. It just needs some time so that all the wrinkles evens out. The photo is after the installation, and the wrinkles doesnt look to good haha.
What fender roller tool are you using there? It looks sort of like the Eastwood Fender Roller Tool.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 52.2 mpg (US) ... 22.2 km/L ... 4.5 L/100 km ... 62.6 mpg (Imp)