You lost me at seat engineer.
You lost me at seat engineer.
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
__________________________________________
View my fuel log 2014 Mirage ES 1.2 manual: 44.4 mpg (US) ... 18.9 km/L ... 5.3 L/100 km ... 53.3 mpg (Imp)
If you can get the spindle off you could always just walk into a shop with the new bearing in hand and have them do the work. Hopefully on the cheap.
But...I'm finding as these cars get older and crustier the abs sensors are starting to seize into the spindles. They kinda have to be removed to press the bearing out(or in?). So if you're gonna attempt it, maybe try to remove the sensor from the spindle before anything else, if it's stuck then order up a new one and try again when you get it.
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
Maybe consider swapping the whole spindle out if you can find a decent used one.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 52.2 mpg (US) ... 22.2 km/L ... 4.5 L/100 km ... 62.6 mpg (Imp)
Didn't even think about that... In hindsight, I should have bought Dirks whole car for the measly 5 bills they gave him...
__________________________________________
View my fuel log 2014 Mirage ES 1.2 manual: 44.4 mpg (US) ... 18.9 km/L ... 5.3 L/100 km ... 53.3 mpg (Imp)