I have a 2015 mirage and I can’t get the rear drums off the car. I have already replaced the rear breaks before and now at 65,000 it needs them again. I swear it eats breaks like mad. With the center nut off the drum will not come off. I hammered at it with a sledge and was finally able to pry it out about 1/2 inch with a screwdriver but it will not come any farther. The wheel bearing seems to have some play in it with the nut off but with it on the wheel sit perfect. Also the center ring of the bearing that sits on the spindle doesn’t seem to move at all like it’s seized but I’m not sure. I looks like it’s trying to pull the bearing apart to me. I torqued everything to spec last time it was apart, I’m simply stumped. Anyone have this happen or have any advice? I really don’t want to pay a shop to fix something I should be able to especially since they want over $300 for just the rear breaks. Thanks