What fails inside the cvt?

[Fummins]

Coming soon.........A non owners uneducated tear down showing what happened. Is higher octane fuel the cause of these failures or is the lack of it a factor??????? Or maybe not rotating hubcaps often enough? Just because I'm making this up doesn't mean I'm wrong......

I'll fix this thread up sometime this weekend!

1:Remove transmission.
2:Remove torque converter
3:Remove bolts around bell-housing.Basically every bolt with a 12mm head.
Attachment 15272
4:Once all the bolts are removed pry the case apart. There are 2 notches that look like they're made for this. One in this pic behind the oil cooler and another in the second last pic. There are also 2 locating pins.
Attachment 15273
5:After some swearing the cover should be off. Now remove the oil pump gears. There is a c-clip that has to be spread open(yellow) while pulling up on the gear. The other gear just pulls up. Undo the bolts circled in green. The 4 on the rh first then lift the tin plate out of the way.
NOTE: there is a small seal at one of the bolt holes just above the output shaft(large shaft lh rear lower of pic)that you don't want to lose.
Attachment 15276
Attachment 15277
Attachment 15278
Attachment 15279