Software for edit ETACS/ECU coding / Full free / No limits

[kolyandex]

Hi all. I think this topic should be here. That soft developed for Mitsubishi GS-platform based vehicles, but, thanks to my Vietnam friends possible to support Mirage/Attrage etc. models (2012+). You're welcome!
PS. Some functions may be unsupported, but reading and writing ECUs coding work well.

MMCodingWriter is a free software for change hidden options (coding) and diagnostics Mitsubishi vehicles (Lancer X 2007 - present time)
No internet required. No limits for any operation.
Free equivalent of MUT-III (partially) and Etacs Decoder.
Support all vehicles, where present ETACS starting 8637A313 and furhter. (including some Peugeot/Citroen models)
Support all J2534-compatible adapters and true ELM327 (USB/Bluetooth) 1.5
Downloads and instructions can be found here: https://forum.kolyandex.su/

Abilities:

1. Read/write variant coding
2. Read/write custom coding
3. Read/write coding in Engine ECU .
4. SAS calibration / G-sensor calibration.
5. Read/erase DTCs.
6. Turn on/off seatbelt reminder on dash (not working on 8100B900 and later).
7. Read/adapt RLS.
8. Erase engine adapts.
9. Change VIN in ETACS and engine.
10. Read errors history with ODO at DTC.
11. Change service reminder
12. Read A/C system pressure
13. Change Immo PIN
14. Reset oil degradation (CVT)

To edit saved coding files use MUT Coding Mitsubishi tool. Link https://acvan.net/programs/mut_coding_mitsubishi.php

Vehicles:
Lancer X, Outlander 3, Outlander XL, L200 2016+, Pajero sport 2016+, ASX, Delica D5, Xpander, Citroen C-Crosser, Peugeot 4007, Mirage, Attrage

Adapters:
Toyota Mini-VCI
Scanmatik 2
OpenPort 2.0
Chipsoft J2534 lite
And other J2534-compatible
ELM327 Bluetooth 1.5
ELM327 USB 1.5
ELS27

Also we have facebook group https://www.facebook.com/groups/mmcodingwriter/about/
THIS SOFTWARE ARE FULL FREE. NO PAYMENTS REQUIRED. NO ANY LIMITATIONS

[MacClyver]

I look forward to trying it. Thanks for putting in the time and effort to develop!

[Dodge Aries K]

I've used it. Good program. Thanks for doing this!

[Top_Fuel]

I would be interested in something like this...but someone is going to have to create some decent, idiot-proof instructions with a good example demonstration.

After messing with the TPMS system, I'm pretty much out of patience for any OBD dealings with this car!

[Eggman]

Who all has used this on their Mirage, and how does it work?

[Dodge Aries K]

I have on several. It works pretty well. I should take a video using it to change some setting on the Mirage I'm supposed to pick up tomorrow. Sadly, not for super cheap.

[Eggman]

I have on several. It works pretty well. I should take a video using it to change some setting on the Mirage I'm supposed to pick up tomorrow. Sadly, not for super cheap.

What all is it capable of?

[Mark]

What all is it capable of?

Abilities:

1. Read/write variant coding
2. Read/write custom coding
3. Read/write coding in Engine ECU .
4. SAS calibration / G-sensor calibration.
5. Read/erase DTCs.
6. Turn on/off seatbelt reminder on dash (not working on 8100B900 and later).
7. Read/adapt RLS.
8. Erase engine adapts.
9. Change VIN in ETACS and engine.
10. Read errors history with ODO at DTC.
11. Change service reminder
12. Read A/C system pressure
13. Change Immo PIN
14. Reset oil degradation (CVT)

Taken from post #1.

I've been accused of not reading entire threads at times. This one was below 10 posts, & I can handle that!

[kolyandex]

Abilities:

1. Read/write variant coding
2. Read/write custom coding
3. Read/write coding in Engine ECU .
4. SAS calibration / G-sensor calibration.
5. Read/erase DTCs.
6. Turn on/off seatbelt reminder on dash (not working on 8100B900 and later).
7. Read/adapt RLS.
8. Erase engine adapts.
9. Change VIN in ETACS and engine.
10. Read errors history with ODO at DTC.
11. Change service reminder
12. Read A/C system pressure
13. Change Immo PIN
14. Reset oil degradation (CVT)

Taken from post #1.

I've been accused of not reading entire threads at times. This one was below 10 posts, & I can handle that!

And some more

- Coding edit now awailable with built-in editor
- Getting PHEV WiFi module password and SSID
- TC-SST coding
- 0-100 kph measurements
- with love from russian Mitsubishi fans

[Eggman]

Taken from post #1.

Yep, I read all that. But it seemed incomplete...

I've been accused of not reading entire threads at times. This one was below 10 posts, & I can handle that!

So I wanted to hear from a forum regular who has experience using it. I figured that would have been obvious but I guess not.

Have you used this software Mark?