Do I really need to remove all plastic clips from the wheel well in order for me put the lamps on? I have the kit and do plan do this without removing my wheel. Don’t want to lift the car unless I have to
Do I really need to remove all plastic clips from the wheel well in order for me put the lamps on? I have the kit and do plan do this without removing my wheel. Don’t want to lift the car unless I have to
You might not have to remove every single clip but I wouldn't bother trying to install fog lights from above if that's what you're thinking of trying. It might work on the driver's side but won't on the passenger side. I'd at least remove the clips from the lower front and where the bumper meets the fender, that might give you enough room if you crank the wheel one way or another and bend the inner fender out of the way.
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
Yeah I hear you and others. I don’t have a choice but to do it through the wheel well.
I want to get the installation right. Just wish I don’t have to remove the wheel but then I won’t have an easy access to mount the lamps especially without a lift. Now if I’m am to rent a lift, I might try? Idk yet.
The worst part about the clip is that it costs $5 each at the dealer if I need:lose one. Ridiculous!
Anyways IÂ’m gonna do it while the car is on ground first. It has been long overdue for me.
Hello Sir, May I ask the specification of relay you use? I want to try this DIY. thanks for sharing.
Last edited by Eggman; 09-09-2023 at 12:43 PM.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)