ETACS coding list programming
The ETACS coding list contains many topics, in addition to many options
This is an invitation for all members to explain their experiences with ETACS coding list programming
ETACS coding list programming
The ETACS coding list contains many topics, in addition to many options
This is an invitation for all members to explain their experiences with ETACS coding list programming
Security Alarm
Description of the standard alarm:
arming is done by pressing the "Lock" button on the key;
disarming is performed by pressing the "Unlock" button on the key, or by turning the key in the ignition;
the alarm is triggered when an unauthorized opening (not by the "Unlock" button on the key) of doors, trunk (in other words, when a command from the immobilizer was not opened when opening) - the car starts to monotonously signal the horn and blink the turn signals.
When the standard alarm is activated, the following changes are made to Variant Coding (Option):
Security alarm mode -> A-spec. (DOM);
Security alarm function -> Present (can change);
If necessary, (in my opinion, it is necessary to do it):
Pre-alarm -> Present.
The essence of the function is to pre-trigger the alarm (squeak the dashboard and display on the BC display the signal of the alarm trigger) for a configurable period of time. For example, if the battery has run out in the key, you can open the door with a lock and, during the pre-alarm period, disarm the car by turning the key in the ignition switch.
Cruise control activation:
I activated it for the future, so that later I wouldn’t return to this, but you yourself know how much hardware in addition to this you need to do restyling to make it work.
Changes in Variant Coding motorboat:
Cruise Control -> present;
Cruise Control Option Coding -> accept.
Auto door lock / unlock
Option:
Auto door lock / unlock -> crash unlock + speed lock (after 20 km / h the lock will be automatically closed)
In the custom (in my opinion) “Auto door unlock” - select the desired option by which the automatic unlocking will occur (I selected - when the key is in the Lock position).
Multi Mode RKE (unlocking the Lock Unlock button setting mode)
Coding Option:
Multi mode RKE -> Enable
Allows you to control the closing / opening of the windows with the key (in my case only the driver's), as well as mirrors and sunroof (but not in my case). So how much I did not bother with this option, namely:
Custom:
Multi Mode - I tried several options, but then the custom firmly refused to change anything.
Power window Dr -> present;
Engine:
Power window Dr -> present;
In general, having killed a huge number of attempts and time to cope with this, I did not succeed, probably my 647 ECU does not support this function. I would be glad if someone tells me.
Trip Computer Autoreset Return at IG OFF
Option:
Trip Computer Autoreset Return at IG OFF - ON "
Custom:
Available -> Not available.
After activation during the first trip, do not forget! Go to the side menu and rearrange the flowmeter to MANUAL mode.
Comfort washer (Comfort washer of a windshield)
When pulling the wiper lever (short) toward yourself, the washer 5 times sprinkles briefly and the wipers pass 5 times. It’s quite convenient, as it were, to complete a full cycle of washing the glass with minimal body movements.
Option:
Comfort washer customize -> Enabled (default enabled)
Custom:
Comfort washer customize -> Enabled (default enabled).
Coming Home Light
This function turns on the dipped headlights after moving the ignition switch to the LOCK position.
With the lights and engine turned off (I think no later than 60 seconds), pull the light control lever toward you.
Option:
Coming Home Light Customize -> Enabled (default enabled) Sets the duration of the glow.
Gcc Speed Alarm
Exceeding point 120 km / h.
Option:
Gcc Speed Alarm -> Available.
Key Reminder (Forgotten Key Reminder)
If after turning off the engine, leave the key in the Lock position and open the door, the display will show the need to remove the key along with the squeak (similar to MOT).
Option:
Key Reminder -> Available
Custom:
Key Remainder Unlock -> A-spec. (Dr only) or B-spec. (Dr and As). Select the options for triggering a reminder.
Horn chirp by keyless (Sound confirmation at closing)
Option:
Horn chirp by RKE -> Present (can change) .--> Present (can change).
Custom:
Horn chirp by RKE - setting the trigger options.
On my own I will add that the bibikalka is unobtrusive and very short (unlike the Gelly SC7, which is in my yard). Allows you to subconsciously remember that the machine was closed, because often this is done automatically.
Power Window Type
If you can argue with the desirability of the remaining options, then this is just a Must Have for everyone.
Option:
Power Window Type * -> Type P1.
Custom:
P / W type - customize as you wish.
Emergency Stop Signal (emergency braking alarm)
Option:
ESS by turn lamp -> present.
When the function is activated, all direction indicators flash, as well as the direction indicator icons on the instrument panel. The function works under the following conditions:
car speed 55 km / h and higher;
The brake pedal is depressed and the ABS system has been activated.
Dead Lock Operation Customize (lock button on the driver’s door)
After closing and placing the car under the protection of a standard alarm, it can be opened in several ways without a key. One way is to insert a third-party object, wire or ruler under the glass or through the gap between the door and the body (after pressing the corner of the door, for example, an air bag) and pressing the open button located on the driver's door.
Option:
Door lock system -> Type 5 (E-spec).
Dead Lock Operation Customize -> Enabled;
After that, the button for opening the central lock on the driver’s door will not work while the car is in the standard alarm guard mode.
That's all. If you think that something is NOT completed / activated, write.
https://www.drive2.com/c/2317762/
Security Alarm (
Daytime Running Lights)
Cruise-control (Installation and activation of standard cruise control)
Installation and activation of front fog lights
Auto door lock / unlock (Auto lock and unlock central locking)
Adaptive Front-lighting System (Adaptive
Headlight AFS) Wiper washer check bulb Warning
TPMS (Tire Pressure Monitoring System)
Multi Mode RKE (Lock Unlock Button Setting Mode)
Trip Computer Autoreset Return at IG OFF
Close ho od (Indication of open hood)
Comfort washer
Door Unlock Mode
Coming Home Light
Head lamp washer
Gcc Speed Alarm
Welcome Light
Key Reminder ( Forgotten Key Reminder)
Horn chirp by keyless
Power Window Type (
Emergency Stop Signal)
i can't find Auto door lock / unlock !
Same here on a Mirage 2018 GLS. It's missing on both variant and custom tab. Speed sensing lock is a lifesaver when you forget to lock. Hope someone can help.
Is there an option on etacs to remove the delay throttle for mirage?
I came across this link the other day but haven't tried it yet.
How to remove throttle delay for mirage.
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)