Originally Posted by
Sipperofgas
Tensioning the belt. I couldn't get the belt when strung to sound like the audio file on here. Maybe i'm just bad with pitch. What I used was the method of using the largest run of the belt. Using your fingers at the middle portion of the belt you try to twist it to 90 degrees. You want to get it so it stops twisting at 90 degrees. Past 90d and it's too loose. Under 90d and it's too tight. I hope this is a good method. This is my first time changind/tensioning a mechanical setup. Went out for a drive and the screech is gone. Yay.
Sounds ( ) like you got it!!! Thanks for the tip!!!
I didn't know what to do, so I didn't do anything
__________________________________________
View my fuel log 2018 Mirage GT 1.2 automatic: 37.3 mpg (US) ... 15.9 km/L ... 6.3 L/100 km ... 44.8 mpg (Imp)