Results 1 to 7 of 7

Thread: DIY cheap removable partial grill block

  1. #1
    Uber Mirage alex16's Avatar
    Join Date
    Dec 2014
    Location
    Minersville Pennsylvania
    Country
    United States
    Posts
    1,171
    Thanks
    87
    Thanked 361 Times in 228 Posts

    DIY cheap removable partial grill block

    I did this in the parking lot of home depo so it's a "ruff draft".

    I used foam pipe insulation for 1'' diameter pipe (I took several sizes out and 1'' was the biggest and seem to be the best). It was 1.95+tax for 6ft. I used about 2 1/2 for the one you see here, seeing how I only needed half I did it really fast knowing I'd have enough to make it over again a little cleaner.

    http://www.homedepot.com/p/Armacell-...1838/100565309

    It comes with some self adhesive ends as well. I pealed them but not having experience I let them touch together on one of them and damaged the adhesive (still didn't come off at 70mph tested speeds).

    I call it a "partial" because I am sure some air can squeeze by even though they fit tightly together. I also left a small air gap on the bottom right which I will cover on my next attempt.







    I monitor my temperature currently with a obd2 elm bluetooth and torque app on a old android phone, I normally average 191-194 degrees F driving, it does the about the same warm up time before/after and no noticed difference in as of yet (its all the little things that add up). My highest temperature was 203 idling in traffic for over 15 minutes.

    I'll try to get a few more pictures of making them and installing them soon, My goal was to block the grill using no major adhesives on the body work, no major drilling/screws into anything and not too much of an eye sore (I would like to find some black pipe insulation).


        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 44.8 mpg (US) ... 19.1 km/L ... 5.2 L/100 km ... 53.9 mpg (Imp)


  2. The Following 2 Users Say Thank You to alex16 For This Useful Post:

    davidricardo86 (03-27-2015),MetroMPG (01-17-2015)

  3. #2
    Administrator MetroMPG's Avatar
    Join Date
    Jan 2013
    Location
    1000 Islands, Ontario
    Country
    Canada
    Posts
    6,661
    Thanks
    2,176
    Thanked 1,857 Times in 1,136 Posts
    How's it holding up? Still have all the foam pieces?

    FYI, I'd block the upper slot before filling the lower area ones. Probably a slightly more aero efficient approach.

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage base ES 1.2 manual: 54.0 mpg (US) ... 23.0 km/L ... 4.4 L/100 km ... 64.9 mpg (Imp)


  4. #3
    Uber Mirage alex16's Avatar
    Join Date
    Dec 2014
    Location
    Minersville Pennsylvania
    Country
    United States
    Posts
    1,171
    Thanks
    87
    Thanked 361 Times in 228 Posts
    It's holding up better than I expected, this is still the rough draft. Haven't tried to make a one with effort yet but I will soon. Name:  image.jpg
Views: 1737
Size:  95.1 KB

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 44.8 mpg (US) ... 19.1 km/L ... 5.2 L/100 km ... 53.9 mpg (Imp)


  5. #4
    Administrator MetroMPG's Avatar
    Join Date
    Jan 2013
    Location
    1000 Islands, Ontario
    Country
    Canada
    Posts
    6,661
    Thanks
    2,176
    Thanked 1,857 Times in 1,136 Posts
    Thanks for the update! Added to the list of modifications/customizations .

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage base ES 1.2 manual: 54.0 mpg (US) ... 23.0 km/L ... 4.4 L/100 km ... 64.9 mpg (Imp)


  6. #5
    Senior Member Ares's Avatar
    Join Date
    Jan 2014
    Location
    Houston
    Country
    United States
    Posts
    1,609
    Thanks
    20
    Thanked 101 Times in 74 Posts
    I've been thinking of how to mount a thin wood/flat piece of something to block the grill. Those foam can be the mount point for the flat cover...

  7. #6
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    3,921
    Thanks
    1,982
    Thanked 1,108 Times in 639 Posts
    With things warming up, how is the grill block working out Alex?
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing
    Current project: Developing a rear sway bar alternative

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 41.7 mpg (US) ... 17.7 km/L ... 5.6 L/100 km ... 50.0 mpg (Imp)


  8. #7
    Uber Mirage alex16's Avatar
    Join Date
    Dec 2014
    Location
    Minersville Pennsylvania
    Country
    United States
    Posts
    1,171
    Thanks
    87
    Thanked 361 Times in 228 Posts
    I removed it a few weeks ago for the dealerships oil change, didn't want them to make any notes of my cars "modifications" even though they did change my tire pressure and told me it's dangerous to have my tires at 45 psi, I told them the last shop I had the snow tires installed at checked my tire pressure

    I will wait until I get my torque app and android tablet set up to monitor engine temperature before reinstalling a fresh one, I might look into 3dplanes grill block as well, need to check with him on his as it looks very nice just curious how it is for removal.


    2014 ES F5MBD aka 5MT. I am a full time Uber driver, if you want to drive for uber DO not sign up without my referral code for a bonus .

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 44.8 mpg (US) ... 19.1 km/L ... 5.2 L/100 km ... 53.9 mpg (Imp)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •