We all know that Mitsubishi is changing the brakes on the 2017 Mirage. We're not sure if the hatch will share the same brakes as the sedan quite yet. So, I figured we'd do the same as we did with the Mirage suspension history and have a thread to document the changes over the years.
2014
- No changes
2015
- New front ABS sensor (left and right are the same part number)
- New rear ABS sensors (left and right are different part numbers)
No 2016 model, see 2017
2017
- Increased front rotor diameter to 251mm
- New brake pad material (brake pad fits on 2014 & 2015)
- Increased rear drum diameter to 203mm was 180mm
- New brake shoe material (brake shoes do not fit 2014 & 2015)
2018
- ?
PART NUMBERS
Part 2014 2015 2017 2018 Front Rotor 4615A105 <---- 4615A129 Front Caliper (L) 4605B001 <---- 4605B003 Front Caliper (R) 4605B002 <---- 4605B004 Front Caliper Support 4605B076 <---- 4605B101 Front Splash Shield 4617A039 <---- <---- Front ABS Sensor 4670A970 & 4670B087 4670B087 <---- Front Brake Pads 4605B005 <---- 4605B530 (fits 2014/15) Rear Drum 3780A018 <---- 3780A018 & 3780A028 Rear Backing Plate (L) 4600A365 <---- 4600A407 Rear Backing Plate (R) 4600A366 <---- 4600A408 Rear ABS sensor (L) 4670B065 & 4670B081 4670B081 <---- Rear ABS sensor (R) 4670B066 & 4670B082 4670B082 <---- Rear brake shoes (R) 4600A350 <---- 4600A028 (does not fit 2014/15)
Front Brakes
1) Rotor
2) Hub
3) Wheel stud
4) Wheel bearing
5) Wheel bearing snap ring
6) Splash shield
7) Splash shield bolt
8) Caliper assembly
9) Caliper support
10) Brake pads
11) Brake hose
12) ABS sensor
Rear Brakes
1) Drum
2) Wheel stud
3) Wheel bearing
4) Snap ring
5) Spindle nut
6) Cap
7) Backing plate
8) Brake shoes
9) Wheel cylinder
10) Brake hose
11) ABS sensor
October 8, 2017: Added 2017 model year part numbers and links. (Eggman)