Small update. I've developed a growl from the front passenger side tire. Looks like I'll be replacing a wheel bearing soon.
My one question is do you need a press to do this, or can you use a good 'ol hammer and socket to smack it in and out
1/18 - Coroplast lower grill block
6/18 - MirageForum decal
8/18 - LED running lights
12/18 - 3d printed upper grill block
12/17 -
Disabled automatic air conditioning
12/17 - Glove box light
1/18 - OEM cruise control
12/17 - Scangauge II
6/18 - 3d printed SGII mount
12/17 -
Kats 1000W circulating block heater
1/18 - Group 24 deep cycle battery
11/18 - Warm Air Intake (WAI)
2/19 - Hood gap weather stripping
8/19 - Alternator disable mod w/ deep cycle battery
1/18 - Rear sway bar
12/17 - Sport Edition D5 wheels
12/17 - Fuzion HRi - 185/60 R14 @ 50 psi
7/19 - Hankooks Kinergy ST LRR tires @ 50 psi
Small update. I've developed a growl from the front passenger side tire. Looks like I'll be replacing a wheel bearing soon.
My one question is do you need a press to do this, or can you use a good 'ol hammer and socket to smack it in and out
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
mohammad (08-27-2022)
Just got my car back from the mechanic. You certainly do need a press to do a front bearing replacement. Guy even let me know it was pressed in there pretty darn good and they had to heat it up to get it out.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Time to sell that lemon?
__________________________________________
View my fuel log 2014 Mirage ES 1.2 manual: 62.4 mpg (US) ... 26.5 km/L ... 3.8 L/100 km ... 74.9 mpg (Imp)
Fummins (09-20-2022)
Can confirm that a press is required. I just did one today. Managed to replace it without removing the abs sensor.
Which wheel bearing did you go with? The rock stars that get me parts could only source a National bearing from out east for almost $200(cad). They eventually bought some WJB rockauto specials that I found for $10/piece(cad).
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
I went with an OE bearing. It was around $120 online. I saw the rockauto ones. I wasn't comfortable rolling the dice on that haha.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Fummins (09-21-2022)