So I’ve done plenty of research and I know that the rear camber on our cars isn’t adjustable and all that stuff... but I’m wondering does anyone know how the rear setup in the following cars was possible?
So I’ve done plenty of research and I know that the rear camber on our cars isn’t adjustable and all that stuff... but I’m wondering does anyone know how the rear setup in the following cars was possible?
1. Custom axle?
2. Photoshop?
3. Jumping train crossings?
4. Clown car?
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
I know from experience that you can do lots of dumb things with an angle grinder and a welder.
Simplify and add lightness.
Scooter (06-22-2018)
Loren, that made me laugh. I guess I can relate.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Hey doax
3D print me a rear camber method!
__________________________________________
View my fuel log 2014 Mirage SE wussie cvt edition. 1.2 automatic: 37.7 mpg (US) ... 16.0 km/L ... 6.2 L/100 km ... 45.3 mpg (Imp)
Ooooof. That’s what i feared... I couldn’t imagine cutting up the axle
Yeah, unfortunately that is the only way to adjust rear camber and/or toe on our cars.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Which begs the question... were you really thinking of doing this? And if so, WHY?
The rear axle is a non-adjustable (in theory) part. But, it IS a replacable part. You can probably get a whole rear axle from salvage for $150-200. If there were bolt-on parts available to get whatever weird camber you want, they would likely cost more than that. So, you mod stock parts, and accept that you might have to replace those stock parts to get back to stock at some point.
Here's something I've learned in recent years. Cutting and welding stuff ain't rocket science. It does take some research and experience to know what the heck you're doing, and when you should reinforce something, and some skill to know that the welding is of sufficient quality. But, if I wanted 30 degrees of camber for some odd reason (or even just 3), I wouldn't hesitate to look at how I could accomplish that with minimal cutting and welding. If you screw it up, or it breaks after a year or two (and yes, you should absolutely INSPECT anything that you've modded pretty frequently for signs of cracking or bending), you can just replace it with another one.
From a performance standpoint, you're not going to gain anything at all by adding more negative camber to the rear of your Mirage. The front, on the other hand... that's where you need more cornering grip. I'm running 3 degrees of negative camber up there!
I've actually toyed with the idea of modding something on the rear axle to try to bring the rear toe closer to zero. It's got LOTS of toe-in back there, especially after you lower it. Any negative camber that you have on the rear axle becomes toe-in as the axle rotates upward. Good for straight-line stability. Not so good for turning.
But, geez... if you're running 30 degrees of camber, you're going to be replacing your tires every couple thousand miles, anyway. Spending a couple bucks on some custom work is just par for the course when you're playing those games.
Simplify and add lightness.
BTW, I did mod the heck out of my front control arms on the Mirage already. Wouldn't recommend it if you're not sure of what you're doing... but, once I came up with a good plan for what I wanted to do, it wasn't at all difficult to accomplish. Didn't cost much, either. Of course, I did all the cutting and fitting myself, and had a friend weld it together for cheap.
I guess cost is relative.
I paid $90 for a new aftermarket pair of control arms on eBay. Something like $80 for my ball joints. Maybe $20 for the hardware to put it all together. And $50 to have it welded. So, maybe $250 for custom lower control arms that made the car handle WAY better than a Mirage has any right to. Totally worth it.
Don't hang out with people like me, we're a bad influence.
Simplify and add lightness.